Linux-Noob Forums

Full Version: dual head with nvidia geforce 5600 kernal 2.6.17-1.2174_FC5
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

i need help makeing it so i can have duel veiw i dont know what to change in my xorg.conf please help

 

 

# Xorg configuration created by system-config-display

 

Section "ServerLayout"

Identifier "Multihead layout"

Screen 0 "Screen0" LeftOf "Screen1"

Screen 1 "Screen1" 0 0

InputDevice "Mouse0" "CorePointer"

InputDevice "Keyboard0" "CoreKeyboard"

Option "Xinerama" "on"

Option "Clone" "off"

EndSection

 

Section "Files"

 

# RgbPath is the location of the RGB database. Note, this is the name of the

# file minus the extension (like ".txt" or ".db"). There is normally

# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)

# By default, Red Hat 6.0 and later now use a font server independent of

# the X server to render fonts.

FontPath "unix/:7100"

EndSection

 

Section "Module"

Load "dbe"

Load "extmod"

Load "fbdevhw"

Load "glx"

Load "record"

Load "freetype"

Load "type1"

Load "dri"

EndSection

 

Section "InputDevice"

 

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))

# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the

# lines below (which are the defaults). For example, for a non-U.S.

# keyboard, you will probably want to use:

# Option "XkbModel" "pc102"

# If you have a US Microsoft Natural keyboard, you can use:

# Option "XkbModel" "microsoft"

#

# Then to change the language, change the Layout setting.

# For example, a german layout can be obtained with:

# Option "XkbLayout" "de"

# or:

# Option "XkbLayout" "de"

# Option "XkbVariant" "nodeadkeys"

#

# If you'd like to switch the positions of your capslock and

# control keys, use:

# Option "XkbOptions" "ctrl:swapcaps"

# Or if you just want both to be control, use:

# Option "XkbOptions" "ctrl:nocaps"

#

Identifier "Keyboard0"

Driver "kbd"

Option "XkbModel" "pc105"

Option "XkbLayout" "us"

EndSection

 

Section "InputDevice"

Identifier "Mouse0"

Driver "mouse"

Option "Protocol" "IMPS/2"

Option "Device" "/dev/input/mice"

Option "ZAxisMapping" "4 5"

Option "Emulate3Buttons" "yes"

EndSection

 

Section "Monitor"

Identifier "Monitor0"

VendorName "Monitor Vendor"

ModelName "MAG DJ707"

DisplaySize 330 240

### Comment all HorizSync and VertSync values to use DDC:

HorizSync 30.0 - 70.0

VertRefresh 50.0 - 120.0

Option "dpms"

EndSection

 

Section "Monitor"

Identifier "Monitor1"

VendorName "Monitor Vendor"

ModelName "ViewSonic GS790"

### Comment all HorizSync and VertSync values to use DDC:

HorizSync 30.0 - 97.0

VertRefresh 50.0 - 160.0

Option "dpms"

EndSection

 

Section "Device"

Identifier "Videocard0"

Driver "nv"

VendorName "Videocard vendor"

BoardName "NVIDIA GeForce FX 5500"

EndSection

 

Section "Device"

Identifier "Videocard1"

Driver "vesa"

VendorName "Videocard Vendor"

BoardName "nVidia Corporation NV31 [GeForce FX 5600]"

BusID "PCI:1:0:0"

Screen 1

EndSection

 

Section "Screen"

Identifier "Screen0"

Device "Videocard0"

Monitor "Monitor0"

DefaultDepth 24

SubSection "Display"

Viewport 0 0

Depth 16

Modes "800x600" "640x480"

EndSubSection

SubSection "Display"

Viewport 0 0

Depth 24

Modes "1280x1024"

EndSubSection

EndSection

 

Section "Screen"

Identifier "Screen1"

Device "Videocard1"

Monitor "Monitor1"

DefaultDepth 24

SubSection "Display"

Viewport 0 0

Depth 24

Modes "1280x1024"

EndSubSection

EndSection

 

Section "DRI"

Group 0

Mode 0666

EndSection


do you have two nvidia video cards in this computer or what, as there are two listed in your xorg.conf, and one is using the nvidia driver (nv) and the other is not, it's using the default non-hardware accelerated video driver (vesa)

 

cheers

 

anyweb

no i have one video card gefroce fx 5600 with my primary moniter in the vga and my secondary in my dvi slot

I just typed this out, so there will most likely be a typo or 5 in it. You will also have to update some of the driver names and paths as this file was being used on a FreeBSD system.

 



Code:
Section "ServerLayout"
        Identifier             "Dual Head"
        Screen           0   "Screen0"     0 0
        Screen           1   "Screen1"     RightOf "Screen0"
        InputDevice        "Mouse0"       "CorePointer"
        InputDevice        "Keyboard0"  "CoreKeyboard"
        Option                "OffTime"      "10"
        Option                "Xinerama"   "false"
        Option                "Clone"        "on"
EndSection

Section "Files"
        RgbPath             "/usr/X11R6/lib/X11/rgb"
        ModulePath        "/usr/X11R6/lib/modules"
        FontPath            "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath            "/usr/X11R6/lib/X11/fonts/TTF/"
        FontPath            "/usr/X11R6/lib/X11/fonts/Typel/"
        FontPath            "/usr/X11R6/lib/X11/fonts/CID/"
        FontPath            "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath            "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
        Load                  "dbe"
        Load                  "extmod"
        Load                  "glx"
        Load                  "record"
        Load                  "xtrap"
        Load                  "freetype"
        Load                  "type1"
EndSection

Section "InputDevice"
        Identifier           "Keyboard0"
        Driver               "kbd"
EndSection

Section "InputDevice"
       Identifier           "Mouse0"
       Driver               "mouse"
       Option               "Protocol" "auto"
       Option               "ZAxisMapping" "4 5"
       Option               "Device" "/dev/sysmouse"
EndSection

Section "Monitor"
       Identifier           "Monitor0"
       VendorName      "Sony"
       ModelName        "SDM-S81"
       Option               "DPMS"
EndSection

Section "Device"
       Identifier           "Card0"
       Driver               "nvidia"
       VendorName     "nVidia Corp."
       BoardName       "MX4000 Plus"
       BusID               "PCI:1:0:0"
       Screen              0
       Option               "RenderAccel" "true"
       Option               "AllowGLXWithComposite" "true"
EndSection

Section "Device"
       Identifier           "Card1"
       Driver               "nvidia"
       VendorName     "nVidia Corp."
       BoardName       "MX4000 Plus"
       BusID               "PCI:1:0:0"
       Screen              1
       Option               "RenderAccel" "true"
       Option               "AllowGLXWithComposite" "true"
       Option               "TwinView"
EndSection

Section "Screen"
       Identifier           "Screen0"
       Device              "Card0"
       Monitor             "Monitor0"
       DefaultDepth     24

       SubSection        "Display"
                               Viewport 0 0
                               Depth     24
                               Modes    "1280x1024"
       EndSubSection
EndSection

Section "Screen"
      Identifier            "Screen1"
      Device               "Card1"
      Monitor              "Monitor0"
      DefaultDepth      24

      SubSection         "Display"
                               Viewport 0 0
                               Depth     24
                               Modes    "1280x1024"
      EndSubsection
EndSubsection