Linux-Noob Forums
Noob: Offline Install of WMP54G - Printable Version

+- Linux-Noob Forums (https://www.linux-noob.com/forums)
+-- Forum: Distro Noob (https://www.linux-noob.com/forums/forum-10.html)
+--- Forum: Fedora (https://www.linux-noob.com/forums/forum-94.html)
+---- Forum: Fedora 7 (https://www.linux-noob.com/forums/forum-46.html)
+---- Thread: Noob: Offline Install of WMP54G (/thread-1178.html)

Pages: 1 2


Noob: Offline Install of WMP54G - SFXBrandon - 2007-09-08


I have downloaded FWcutter, Ndiswrapper, and the Windows Firmware for my card.

 

The problem is, the HOWTO wants to do a yum command, only i have no internet connection on that computer. So "YUM" wont work.

 

This is my first time using Linux, so I have no clue what i am doing.

 

I have a Linksys WMP54G with a Broadcom BCM4306 chipset.

 

Please help.




Noob: Offline Install of WMP54G - anyweb - 2007-09-08


welcome to the forums, can you give me the link of the howto and i'll tell you what you need to do

 

cheers

anyweb




Noob: Offline Install of WMP54G - SFXBrandon - 2007-09-08


its the Howto on these forums:

[/url][url=<___base_url___>/index.php?showtopic=3014][/url][url=<___base_url___>/index.php?showtopic=3014]https://www.linux-noob.com/forums/index.php?showtopic=3014




Noob: Offline Install of WMP54G - SFXBrandon - 2007-09-08


Quote:its the Howto on these forums:[/url][url=<___base_url___>/index.php?showtopic=3014][/url][url=<___base_url___>/index.php?showtopic=3014]https://www.linux-noob.com/forums/index.php?showtopic=3014
 

Sorry, I am a complete noob. This is a computer in my room, and i dont have access to a wired connection from it. So, i have to download stuff from my laptop with windows, and transfer it to my computer via USB Stick.




Noob: Offline Install of WMP54G - SFXBrandon - 2007-09-08


Alright, I have an idea of how to install Ndiswrapper, but i have NO clue on how to make a Kernel to install it.

 

I have searched all over google, but obviously im still here...

 

Without a Internet connection, how would i do that?




Noob: Offline Install of WMP54G - jerzykiller - 2007-09-09


First, you need those 2 packages:

kmod-ndiswrapper-1.46-1.2.6.22.4_65.fc7

ndiswrapper-1.46-1.lvn7

but look at the kmod-ndiswrapper. It has to be version which fits to your kernel version. On example i have:

kernel-2.6.22.4-65.fc7

kmod-ndiswrapper-1.46-1.2.6.22.4_65.fc7

If your kernel version isn't the same like you can see above, then you must download new/old kernel/kmod-ndiswrappper

If you don't have internet connection, then you can install it by: yum localinstall /home/sfxbrandon/kmod-ndiswrapper...rpm

Then to load this module just type:

modprobe ndiswrapper

 

Btw. I can recommend for you to not use ndiswrapper. I bought wifi card 2 days ago, and I thought ndiswrapper is going to be the best way to use it... I was wrong. In my PC it hanged up every time i loaded any web page. So, if there are drivers for your card anywhere in the internet, then I think you shoild try it.




Noob: Offline Install of WMP54G - anyweb - 2007-09-09


Quote:its the Howto on these forums:[/url][url=<___base_url___>/index.php?showtopic=3014][/url][url=<___base_url___>/index.php?showtopic=3014]https://www.linux-noob.com/forums/index.php?showtopic=3014
 

ah ok, then download the following please

 

wget [/url]ftp://mirror.switch.ch/mirror/fedora/linu....fc7.x86_64.rpm

 

you may need to install some requirement files also,. if so, they are listed here

 

[url=http://rpm.pbone.net/index.php3/stat/4/idp...x86_64.rpm.html]http://rpm.pbone.net/index.php3/stat/4/idp...x86_64.rpm.html

 

good luck

 

cheers

anyweb




Noob: Offline Install of WMP54G - SFXBrandon - 2007-09-09


Alright, i got everything installed, and supposedly right.

 

Now, my problem:

 

My wireless connection comes up under Device eth0.

 

The instructions talk about wlan0.

 

I try to activate my card, and it says "Failed; no link present. Check Cable?"

 

I did what you said in that howto by doing the iwconfig and ifconfig stuff.

 

Only, i set my wlan0 to my accesspoint's essid to "orE9Ne".

 

It does not connect to it still. i Assigned an ip to it. and dhclient freezes my computer.




Noob: Offline Install of WMP54G - SFXBrandon - 2007-09-09


Right now, im gonna start all over with a clean install.

 

Im not sure if maybe in my tinkering with other ways to install this card, i messed something up.

 

If it works, ill tell you.




Noob: Offline Install of WMP54G - SFXBrandon - 2007-09-09


Quote:Right now, im gonna start all over with a clean install. 

Im not sure if maybe in my tinkering with other ways to install this card, i messed something up.

 

If it works, ill tell you.
 

Im not sure if maybe im missing something or not, but still no luck with a fresh install.

 

I have fwcutter and broadcom-wl-4.80.53.0

 

Now, when i complete the instructions, nothing has been done. I look at my Network list, and the only profile there has a hardware that doesnt have broadcom in it.

 

it has RTL8139 SMC EZ Card which i am sure is my motherboard's ethernet connection.

 

No where in the list for either Ethernet or Wireless is there a Broadcom 4306 Adapter. The only Broadcom is Tigon3

 

Im stuck here now.