Jump to content

Addy

Members
  • Content Count

    9
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Addy

  • Rank
    Noob
  1. Cool, ok thank you znx okay... so... is there a way to find out how it's running overall, I mean, i understand what you said, and its not a web server, but its a multi-funcation server. But i know what the load should be under... but is there a way to know how the server is running, as i said like a calculation? Load * connection / cpu or something. I need to know what to look out for as a whole, not just the load. I have a connection graph, and i have 10Mbit to play with, so i know if there is to much traffic or not, but how do i know if the server is coping with the traffic or not. Is that where LOAD comes in, and CPU usage ? this is what im not 100% sure on. thanks
  2. Hello all, I would like you know if there is a rule of thumb or a chart that could feel me how the server is coping. I have a Bandwidth hourly monitor, and in shell using "TOP" i can see the load and the CPU usage and Memory usage. What i would like to know is, for example: the server is using 1Mbit of the connection constantly, the load fluctuates from 0.85 - 1.57 and the CPU is about 30% including Hyper-Threading How would i know, maybe by a calculation if the server is coping well or not with the values given. I do not have a problem with the server, but i would like to know more on how to see if there is a problem with the capabilities of the server at anytime if a problem comes up, and if its the server doing to much or not. I hope this is explained ok. Thank you.
  3. Something is wrong.. i just did it again, and it said the CPU was 4 degrees C. It must be getting confussed with the sensors....
  4. ok.. got it to work... this is the output: Adapter: ISA adapter VCore 1: +1.36 V (min = +1.42 V, max = +1.57 V) ALARM VCore 2: +1.58 V (min = +2.40 V, max = +2.61 V) ALARM +3.3V: +6.75 V (min = +3.14 V, max = +3.46 V) ALARM +5V: +5.00 V (min = +4.76 V, max = +5.24 V) +12V: +10.37 V (min = +11.39 V, max = +12.61 V) ALARM -12V: -14.97 V (min = -12.63 V, max = -11.41 V) ALARM -5V: -6.64 V (min = -5.26 V, max = -4.77 V) ALARM Stdby: +4.87 V (min = +4.76 V, max = +5.24 V) VBat: +3.18 V fan1: 7670 RPM (min = 0 RPM, div = 8) fan2: 10546 RPM (min = 664 RPM, div = 8) fan3: 0 RPM (min = 664 RPM, div = 8) M/B Temp: +62°C (low = +15°C, high = +40°C) sensor = diode CPU Temp: +27°C (low = +15°C, high = +45°C) sensor = thermistor ALARM Temp3: +37°C (low = +15°C, high = +45°C) sensor = thermistor ALARM eeprom-i2c-0-51 Adapter: SMBus Via Pro adapter at 0500 Memory type: DDR SDRAM DIMM Memory size (MB): 512 eeprom-i2c-0-50 Adapter: SMBus Via Pro adapter at 0500 Memory type: DDR SDRAM DIMM Memory size (MB): 512 i do not know what Temp3 is... nor do i understand why i get the above messages... anyone ?
  5. hiya.. that is was i did, but i still the error.
  6. i am not sure what the command dose, but, I dont really understand it.. and when i put it on, it just hangs there... I installed it.. by i think... putting in sensors-detect, I did not install it myself, it was already there.
  7. yes, and i run through the list, paste the info needed into the right file, and copy as it requests at the end. but... still no joy. when i put Sensors in the cmd line, i get this error: [root@machine1 ~]# sensors Error: Line 2382: Invalid keyword General parse error ?
  8. i have tried to install LM_senosrs.. and i cannot seem to make it work.. its all install.. that i can see.. but no joy. the servers are not held near me... so.. its abit of a trip to do it that way... also.. its not even a duel macheine.... are there any really good guilds how to install LM_SENSORS, i have seached the net.. but they all seem out of date.. and thou the newest helps with with the questions.. i do as it says.. it still dont work... ?
  9. I have this error message come up on 3 servers... Message from syslogd@machine3 at Sun Feb 27 17:15:46 2005 ... machine3 kernel: CPU1: Temperature above threshold Message from syslogd@machine3 at Sun Feb 27 17:15:46 2005 ... machine3 kernel: CPU0: Temperature above threshold Message from syslogd@machine3 at Sun Feb 27 17:15:46 2005 ... machine3 kernel: CPU0: Running in modulated clock mode Message from syslogd@machine3 at Sun Feb 27 17:15:46 2005 ... machine3 kernel: CPU1: Running in modulated clock mode I thought it was due to it getting hot, so i purchase a 1U Heatsink with fan, so its getting cool air to it. Can anyone suggest anything for me. It's 775 modo with a Intel P4 3 Ghz and 1 gig DDR ram. it has 5 blow fans, 2 suck fans, and a CPU fan. Thanks
×
×
  • Create New...