Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help with an error message CPU.....
#1

I have this error message come up on 3 servers...

 

Message from syslogd@machine3 at Sun Feb 27 17:15:46 2005 ...

machine3 kernel: CPU1: Temperature above threshold

 

Message from syslogd@machine3 at Sun Feb 27 17:15:46 2005 ...

machine3 kernel: CPU0: Temperature above threshold

 

Message from syslogd@machine3 at Sun Feb 27 17:15:46 2005 ...

machine3 kernel: CPU0: Running in modulated clock mode

 

Message from syslogd@machine3 at Sun Feb 27 17:15:46 2005 ...

machine3 kernel: CPU1: Running in modulated clock mode

 

 

I thought it was due to it getting hot, so i purchase a 1U Heatsink with fan, so its getting cool air to it.

 

Can anyone suggest anything for me.

 

It's 775 modo with a Intel P4 3 Ghz and 1 gig DDR ram. it has 5 blow fans, 2 suck fans, and a CPU fan.

 

 

Thanks

Reply
#2
Did you check your CPU temperature when you got those messages? If you don't know how to do that check "lm_sensors" (or enter the BIOS very fast after rebooting :/). The first message should be self explanationary, second one means that the CPU is not running at full speed.
Reply
#3

i have tried to install LM_senosrs.. and i cannot seem to make it work.. its all install.. that i can see.. but no joy.

 

the servers are not held near me... so.. its abit of a trip to do it that way...

 

also.. its not even a duel macheine....

 

are there any really good guilds how to install LM_SENSORS, i have seached the net.. but they all seem out of date.. and thou the newest helps with with the questions.. i do as it says.. it still dont work... ?

Reply
#4
Which problems did you have with lm_sensors? Did you run "sensors-detect"?
Reply
#5

yes, and i run through the list, paste the info needed into the right file, and copy as it requests at the end.

 

but... still no joy.

 

when i put Sensors in the cmd line, i get this error:

 

[root@machine1 ~]# sensors

Error: Line 2382: Invalid keyword

General parse error

 

?

Reply
#6

Quote:[root@machine1 ~]# sensorsError: Line 2382: Invalid keyword

General parse error
Ehm? o_O This file is a binary on my FC4 release and not a script. What do you get upon "head -n2382 `which sensors`|tail -n1" (with backticks ``, but without quotes "")? How did you install lm_sensors?

Reply
#7

i am not sure what the command dose, but, I dont really understand it.. and when i put it on, it just hangs there...

 

I installed it.. by i think... putting in sensors-detect, I did not install it myself, it was already there.

Reply
#8

Hi,

 

To install lm_sensors do the following as root:

 



Code:
yum install lm_sensors




Reply
#9

hiya..

 

that is was i did, but i still the error.

Reply
#10

ok.. got it to work... this is the output:

 

Adapter: ISA adapter

VCore 1: +1.36 V (min = +1.42 V, max = +1.57 V) ALARM

VCore 2: +1.58 V (min = +2.40 V, max = +2.61 V) ALARM

+3.3V: +6.75 V (min = +3.14 V, max = +3.46 V) ALARM

+5V: +5.00 V (min = +4.76 V, max = +5.24 V)

+12V: +10.37 V (min = +11.39 V, max = +12.61 V) ALARM

-12V: -14.97 V (min = -12.63 V, max = -11.41 V) ALARM

-5V: -6.64 V (min = -5.26 V, max = -4.77 V) ALARM

Stdby: +4.87 V (min = +4.76 V, max = +5.24 V)

VBat: +3.18 V

fan1: 7670 RPM (min = 0 RPM, div = 8)

fan2: 10546 RPM (min = 664 RPM, div = 8)

fan3: 0 RPM (min = 664 RPM, div = 8)

M/B Temp: +62°C (low = +15°C, high = +40°C) sensor = diode

CPU Temp: +27°C (low = +15°C, high = +45°C) sensor = thermistor ALARM

Temp3: +37°C (low = +15°C, high = +45°C) sensor = thermistor ALARM

 

eeprom-i2c-0-51

Adapter: SMBus Via Pro adapter at 0500

Memory type: DDR SDRAM DIMM

Memory size (MB): 512

 

eeprom-i2c-0-50

Adapter: SMBus Via Pro adapter at 0500

Memory type: DDR SDRAM DIMM

Memory size (MB): 512

 

 

i do not know what Temp3 is... nor do i understand why i get the above messages...

 

anyone ?

Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)