Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problem with USB - Ethernet Converter of FC5
#1

Hi

 

I have a ADM8511 Pegasus II USB Ethernet Converter. I have Fedora Core5 running on my System.

 

The problem is I can see my device listed under Hardware, but get the following error when I try & add it as a new device under the devices menu.

 

pegasus device eth2 does not seem to be present, delaying initialization.

 

The following is the Output of lsusb command :

 

[root@localhost ~]# lsusb

Bus 002 Device 001: ID 0000:0000

Bus 002 Device 002: ID 1267:0201 Logic3 / SpectraVideo plc A4Tech SWOP-3 Mouse

Bus 005 Device 001: ID 0000:0000

Bus 004 Device 001: ID 0000:0000

Bus 003 Device 002: ID 07a6:8511 ADMtek, Inc. ADM8511 Pegasus II Ethernet

Bus 003 Device 001: ID 0000:0000

Bus 001 Device 001: ID 0000:0000

 

My Kernel Version is : 2.6.15-1.2054_FC5

 

The lsusb detects the device as shown above, but the device is not detected under the /dev directory.

 

 

I'm lost. How can I fix this ??? The device works perfectly under Windows XP

 

regards

 

krish.

Reply
#2

you'll need to use ndiswrapper to get it to work

 

here's a guide for configuring ndiswrapper

 

[/url][url=<___base_url___>/index.php?showtopic=2098][/url][url=<___base_url___>/index.php?showtopic=2098]https://www.linux-noob.com/forums/index.php?showtopic=2098

 

cheers

anyweb

Reply
#3

I see that its support with the "pegasus" module. Try this for me:

 



Code:
# modprobe pegasus
# ifconfig -a




 

And paste the results in the forum.

Reply
#4

Quote:I see that its support with the "pegasus" module. Try this for me: 



Code:
# modprobe pegasus
# ifconfig -a

<div>


 

And paste the results in the forum.

</div>
 

Hi

 

this is the result of the errand you asked me to carry out :

 

[root@localhost /]# modprobe pegasus

[root@localhost /]# ifconfig -a

eth0 Link encap:Ethernet HWaddr 00:16:36:25:C8:B2

inet addr:192.168.10.2 Bcast:192.168.10.255 Mask:255.255.255.0

inet6 addr: fe80::216:36ff:fe25:c8b2/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:34844 errors:0 dropped:0 overruns:0 frame:0

TX packets:18447 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:14935015 (14.2 MiB) TX bytes:5471062 (5.2 MiB)

Interrupt:20 Base address:0x6000

 

eth1 Link encap:Ethernet HWaddr 00:00:E8:00:11:45

BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

 

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:2201 errors:0 dropped:0 overruns:0 frame:0

TX packets:2201 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:2632641 (2.5 MiB) TX bytes:2632641 (2.5 MiB)

 

sit0 Link encap:IPv6-in-IPv4

NOARP MTU:1480 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

 

 

regards

 

Krish

Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)