Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My Gentoo Installation (Work in Progress)
#1

My Gentoo Installation (Work in Progress)

 

I've finally decided to really dedicate myself to learning Linux and using Linux more than I currently do. The first step is taking the main computer (my laptop) that I use all the time and converting it from Windows XP to Gentoo.

 

Laptop Specs

Dell Inspiron 6400

Intel T7400 - Core 2 Duo 2.16Ghz

1GB of RAM

60GB Hard Drive

ATI X1400 Video Card

Conexant HDA D110 MDC V.92 Modem

Broadcom 440x 10/100 Integrated Contoller

Intel PRO/Wireless 3945ABG Network Connection

Standard SD Host contoller (Secure Digital Card)

SigmaTel High Definition Audio Codec

Intel USB2 Enhanced Host Controller

 

So, I started doing this research to figure out some common things that I'm going to have to know when I do my gentoo installation based on these specs. So far I've determined, thanks to the help of #gentoo on irc.freenode.net that i'll need to use the following for my processor to take full advantage of it. Special Thanks to FunnyMan3595 for his help!

 



Code:
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=nocona -O2 -pipe -fomit-frame-pointer"
MAKEOPTS="-j3"
CXXFLAGS="${CFLAGS}"

USE Flags = mmxext sse2




 

It was suggested to use -march=prescott because it 'might' be faster, however Intel recommends -march=nocona. I found that prescott was origionally suggested in a gentoo forums debate for core duo processors. Since then Core 2 Duo has come out and it's recommended nocona. Another note I found was "As of GCC 4.3, you can set -march to "core2". This also enables the SSSE3 instruction set, also new in 4.3. However, gcc 4.3 is only available in the gentoo 'toolchain' overlay and given it's stability level (pre-alpha) you'd be mad to use that right now."

 

You can continue to watch the Gentoo Safe_Cflags page for updates.

 

From here I'm going to continue my research on other applications I plan to run and what flags or options I'll need to use to customize my system for the best performance. More to come....

Reply
#2

Suggestions from others...

 

Nastjuid from #gentoo on Efnet told me to check into tmpfs and parallel-fetch on the gentoo-wiki. Here is what I found.

tmpfs - [/url]http://gentoo-wiki.com/TIP_Speeding_up_portage_with_tmpfs

parallel-fetch - When you are emerging a series of packages, Portage can fetch the source files for the next package in the list even while it is compiling another package, thus shortening compile times. To make use of this capability, add "parallel-fetch" to your FEATURES.

 

USE="X dbus samba cups hal avahi alsa svg gtk exo panel-plugin thunar-vfs spell xml -gnome -kde -qt"

 

cat /etc/portage/package.use | grep xfce

xfce-extra/exo python

xfce-base/xfdesktop plugins

 

xorg-x11, xgl, xfce, beryl

 

deface from #gentoo on EFnet - USE="bzip2 X tk threads symlink jpeg png gif pdf xml ldap kerberos \

xinerama cdr dts dvdread dv dvdr dvd xine win32codecs mp3 mpeg alsa \

oss gstreamer mad asf gd gtk2 gtk bitmap-fonts \

truetype-fonts type1-fonts dbus avi live matroska mpeg oggvorbis real \

theora xanim xcomposite mpd audacious samba qt3 qt4 ogg flac xosd \

java gphoto2 scanner quicktime mplayer opengl rdesktop ssl \

vcd xinetd msn aac"

 

quannum from #gentoo on EFnet - USE="3dnow -acl alsa -arts gif gtk gtk2 -ipv6 jpeg -kde -qt -ldap -mikmod mmx mp3 opengl nptl png sse tiff -samba vorbis X"

 

Gentoo-Xeffects - [url=http://wiki.gentoo-xeffects.org/Main_Page#XGL]http://wiki.gentoo-xeffects.org/Main_Page#XGL

Reply
#3

[/url]http://www.uberpenguin.net/?p=3

 

[url=http://gentoo-wiki.com/HOWTO_Gentoo_on_lap...RAM_and_Standby]http://gentoo-wiki.com/HOWTO_Gentoo_on_lap...RAM_and_Standby

Reply
#4

Gentoo nox

fdisk /dev/sda

1. N, P, 1, (Hit enter), +100MB

2. N, p, 2, (Hit enter), +512MB, t, 2, 82

3. N, p, 3, (hit enter), (hit enter)

4. W

mke2fs /dev/sda1

mke2fs -j /dev/sda3

mkswap /dev/sda2 && swapon /dev/sda2

mount /dev/sda3 /mnt/gentoo

mkdir /mnt/gentoo/boot

mount /dev/sda1 /mnt/gentoo/boot

date 011721332007

cd /mnt/gentoo

mkdir /mnt/usb

mount /dev/sdb1-t vfat /mnt/usb

cp /mnt/usb/gentoo/stage* /mnt/gentoo/

time tar xjpf stage3*

cd /mnt/gentoo/usr

cp /mnt/usb/gentoo/portage* /mnt/gentoo/usr/

time tar xjf portage*

cd /

mount -t proc proc /mnt/gentoo/proc

 

Configuring the Compile Options

nano -w /mnt/gentoo/etc/make.conf

1. CHOST="i686-pc-linux-gnu"

2. CFLAGS="-march=nocona -O2 -pipe -fomit-frame-pointer"

3. MAKEOPTS="-j3"

4. FEATURES=”parallel-fetch”

5. Add any other settings that customize your system!

 

cp -L /etc/resolv.conf /mnt/gentoo/etc/

chroot /mnt/gentoo /bin/bash

env-update && source /etc/profile

passwd

cp /usr/share/zoneinfo/US/Central /etc/localtime

date

cd /etc

echo "127.0.0.1 GFS.MYDOMAIN.LOCAL GFS localhost" > hosts

sed -i -e 's/HOSTNAME.*/HOSTNAME="GFS"/' conf.d/hostname

hostname GFS

#hostname

emerge --sync

 

nano -w /etc/locale.gen

delete all but

en_US ISO-8859-1

en_US.UTF-8 UTF-8

 

locale-gen

 

time emerge gentoo-sources

cd /usr/src/linux

make menuconfig

make && make modules_install

cp arch/i386/boot/bzImage /boot/kernel

cd /etc

nano -w fstab

/dev/sda1 /boot ext2 defaults,noatime 1 2

/dev/sda2 none swap sw 0 0

/dev/sda3 / ext3 noatime 0 1

/dev/cdroms/cdrom0 /mnt/cdrom auto noauto,ro 0 0

#/dev/fd0 /mnt/floppy auto noauto 0 0

proc /proc proc defaults 0 0

shm /dev/shm tmpfs nodev,nosuid,noexec 0 0

cd conf.d

rc-update add net.eth0 default

rc-update add sshd default

time emerge syslog-ng

rc-update add syslog-ng default

emerge dhcpcd

emerge grub

nano -w /boot/grub/grub.conf

add to grub.conf

- default 0

- timeout 30

- splashimage=(hd0,0)/boot/grub/splash.xpm.gz

- title=Gentoo Linux 2.6

- root (hd0,0)

- kernel /boot/kernel root=/dev/hda3

grub

root (hd0,0)

setup (hd0)

quit

exit

umount /mnt/gentoo/proc /mnt/gentoo/boot /mnt/gentoo /mnt/usb

Reply
#5
USE="X alsa gtk gtk2 rdesktop win32codecs mp3 mpeg bzip2 jpeg png pdf bitmap-fonts truetype-fonts avi dbus mpeg quicktime"
Reply
#6
www.gentoo-install.com - great resouce for learning to install gentoo
Reply
#7
<deface> mechtn: i'd also add truetype & xft to your use flags
Reply
#8

installed ufed to help me pick my use flags

 

emerge ufed

 

Also used this website to help me. [/url][url=http://www.gentoo.org/dyn/use-index.xml]http://www.gentoo.org/dyn/use-index.xml

Reply
#9

ermege ufed

emerge xorg-x11

emerge

Reply
#10

emerge mozilla-firefox-bin

emerge rdesktop

emerge kuroo

emerge xchat

emerge xdm

 

had to make some changes to add xdm into the picture

 

nano -w /etc/rc.conf

XSESSION="startxfce4"

DISPLAYMANGER="xdm"

 

then had to restart xdm

/etc/init.d/xdm restart

 

rc-update add xdm default

Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)