Jump to content
Arvind KR

How to enable digital audio output in f7???

Recommended Posts

hey .. it has been jus 3 days since i installed linux in my comp... :rolleyes: but i want to know how to enable the digital audio output port in linux.. it works fine in windows but i dont know how to make it work in linux.

 

here is my lspci result:

 

00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04)
       Subsystem: Hewlett-Packard Company Unknown device 2a08
       Flags: bus master, fast devsel, latency 0
       Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 04) (prog-if 00 [VGA])
       Subsystem: Hewlett-Packard Company Unknown device 2a08
       Flags: bus master, fast devsel, latency 0, IRQ 16
       Memory at cfe80000 (32-bit, non-prefetchable) [size=512K]
       I/O ports at b800 [size=8]
       Memory at d0000000 (32-bit, prefetchable) [size=256M]
       Memory at cfe40000 (32-bit, non-prefetchable) [size=256K]
       Capabilities: [d0] Power Management version 2

00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
       Subsystem: Hewlett-Packard Company PufferM-UL8E
       Flags: bus master, fast devsel, latency 0, IRQ 16
       Memory at cfe38000 (64-bit, non-prefetchable) [size=16K]
       Capabilities: [50] Power Management version 2
       Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
       Capabilities: [70] Express Unknown type IRQ 0

00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
       Flags: bus master, fast devsel, latency 0
       Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
       I/O behind bridge: 0000c000-0000cfff
       Capabilities: [40] Express Root Port (Slot+) IRQ 0
       Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
       Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 2a0a
       Capabilities: [a0] Power Management version 2

00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [uHCI])
       Subsystem: Hewlett-Packard Company Unknown device 2a0a
       Flags: bus master, medium devsel, latency 0, IRQ 17
       I/O ports at a400 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [uHCI])
       Subsystem: Hewlett-Packard Company Unknown device 2a0a
       Flags: bus master, medium devsel, latency 0, IRQ 18
       I/O ports at a800 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [uHCI])
       Subsystem: Hewlett-Packard Company Unknown device 2a0a
       Flags: bus master, medium devsel, latency 0, IRQ 19
       I/O ports at b000 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [uHCI])
       Subsystem: Hewlett-Packard Company Unknown device 2a0a
       Flags: bus master, medium devsel, latency 0, IRQ 16
       I/O ports at b400 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
       Subsystem: Hewlett-Packard Company Unknown device 2a0a
       Flags: bus master, medium devsel, latency 0, IRQ 17
       Memory at cfe37c00 (32-bit, non-prefetchable) [size=1K]
       Capabilities: [50] Power Management version 2
       Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) (prog-if 01 [subtractive decode])
       Flags: bus master, fast devsel, latency 0
       Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
       I/O behind bridge: 0000d000-0000efff
       Memory behind bridge: cff00000-cfffffff
       Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device 2a0a

00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
       Subsystem: Hewlett-Packard Company Unknown device 2a0a
       Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
       Subsystem: Hewlett-Packard Company Unknown device 2a0a
       Flags: bus master, medium devsel, latency 0, IRQ 19
       I/O ports at 01f0 [size=8]
       I/O ports at 03f4 [size=1]
       I/O ports at 0170 [size=8]
       I/O ports at 0374 [size=1]
       I/O ports at ffa0 [size=16]

00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
       Subsystem: Hewlett-Packard Company Unknown device 2a0a
       Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
       I/O ports at a000 [size=8]
       I/O ports at 9800 [size=4]
       I/O ports at 9400 [size=8]
       I/O ports at 9000 [size=4]
       I/O ports at 8800 [size=16]
       Capabilities: [70] Power Management version 2

00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
       Subsystem: Hewlett-Packard Company Unknown device 2a0a
       Flags: medium devsel, IRQ 18
       I/O ports at 0400 [size=32]

02:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
       Subsystem: Hewlett-Packard Company Unknown device 2a0c
       Flags: bus master, medium devsel, latency 64, IRQ 21
       Memory at cffff800 (32-bit, non-prefetchable) [size=2K]
       I/O ports at e800 [size=128]
       Capabilities: [50] Power Management version 2

02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
       Subsystem: Hewlett-Packard Company Unknown device 2a0b
       Flags: bus master, medium devsel, latency 64, IRQ 20
       I/O ports at e400 [size=256]
       Memory at cffff400 (32-bit, non-prefetchable) [size=256]
       Capabilities: [50] Power Management version 2

02:03.0 Communication controller: Agere Systems V.92 56K WinModem (rev 03)
       Subsystem: Agere Systems Unknown device 044c
       Flags: bus master, medium devsel, latency 64, IRQ 11
       Memory at cffff000 (32-bit, non-prefetchable) [size=256]
       I/O ports at e000 [size=8]
       I/O ports at d800 [size=256]
       Capabilities: [f8] Power Management version 2

 

 

i hav a yamaha digital sound projector and i m eager to use it with linux ... someone pls help me :unsure:

Share this post


Link to post
Share on other sites

Hello,

 

As root type:

 

system-config-soundcard

 

And you will be able to see if you're card is supported/working.

Share this post


Link to post
Share on other sites
no use guys.. :(

i tried alsamixer. everything was turned on but no digital output..

 

my soundcard is well detected. its

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...