Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Networking
#1

This is my Windows Settings

 

Windows IP Configuration

Host Name . . . . . . . . . . . . : mashinename

Primary Dns Suffix . . . . . . . : QNET.SI

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

DNS Suffix Search List. . . . . . : QNET.SI

 

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet for hp

Physical Address. . . . . . . . . : 00-0D-9D-4E-85-D4

Dhcp Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 10.13.254.55

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 10.13.254.254

DNS Servers . . . . . . . . . . . : 193.189.160.11

193.189.160.12

 

How to set up networking in Linux Slackware for this system. Iff I Use Netconf I only can ping internal network and I cant go on web. No host found ...

Reply
#2

what does lspci say (paste it here)

 

lspci

 

and

 

ifconfig

 

you'll need the TG3 driver loaded the for the gigabit network card

 

cheers

 

anyweb

Reply
#3

Hey it's been a while since I've been on here, but I figure I'll try to get back in the swing of things.

 

Normally if you can ping your internal network you need to set your DNS. This is pretty easty.

 

Just modify /etc/resolv.conf

 

This file and you should be on your way. If this doesn't work you may need to make sure that your gateway is configured properly.

Reply
#4

This is my lspci

 

00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 44)

00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]

00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 23)

00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 10)

00:07.2 USB Controller: VIA Technologies, Inc. VT6202 [uSB 2.0 controller] (rev 11)

00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 30)

00:0c.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)

00:12.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)

01:00.0 VGA compatible controller: nVidia Corporation NV6 [Vanta/Vanta LT] (rev 15)

 

 

And I allredy figure it out. I Haven't configure my DNS, or in slackware NAMESERVER in netconf

Am I Right ?? o_Oo_O:/

Reply
#5

Whell I'm Writing on Linux Now So It Worked. :)

In /etc/resolve.conf I add a line nameserver 193.189.160.11

 

How to add aother nameserver (DNS) 193.189.160.12 ? Just adding a line ? o_O

Reply
#6

Yes, just add another line and if you need a domain-suffix you do so:

 



Code:
search bla.com
nameserver 1.1.1.1
nameserver 2.2.2.2
nameserver 3.3.3.3




 

z0ny

Reply
#7
Thnx It Worked Fine Now. Thnx Annyway
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)