Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Software Install with YUM
#1

1. Overview

 

YUM extends RPM functionality by downloading and installing packages directly from online repositories. As well as all the advantages of RPM, YUM provides a few more handy features:


  • version compatibility: YUM will automatically locate the latest package version on that repo suited to your kernel


  • pre-requisites satisfied: any dependencies are automatically downloaded and installed first - solving that bugbear of "RPM dependency hell"


  • supports local installation: YUM can attempt to install a locally-held RPM package, satisfying pre-requisites online if necessary.


  • package updates: YUM can be instructed to update all installed software with only a few simple commands - or even scheduled to perform this automatically at regular intervals


  • repo index caching: YUM caches an index of repo packages, which can be interrogated to determine repo contents without going online - this can be used to search for packages, or determine what packages provide a required command - or even what are the dependencies for a specific package.


  • repo reports: YUM can report what repos are in effect, which is a bit clearer than trawling through directories of config files.


  • cache management: YUM downloads RPM packages into a cache area prior to installing; a few options to YUM can flush this cache to tidy up after itself




 

2. Basic Commands

 

1. Installing a package: yum install packagename(s), for example:



Code:
# yum install cacti
Loaded plugins: refresh-packagekit
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
--> Running transaction check
---> Package cacti.noarch 0:0.8.7b-4.fc10 set to be updated
--> Processing Dependency: rrdtool for package: cacti
--> Processing Dependency: php-snmp for package: cacti
--> Processing Dependency: mysql for package: cacti
--> Running transaction check
---> Package rrdtool.i386 0:1.3.4-2.fc10 set to be updated
--> Processing Dependency: dejavu-lgc-fonts for package: rrdtool
---> Package mysql.i386 0:5.0.67-2.fc10 set to be updated
--> Processing Dependency: perl(DBI) for package: mysql
---> Package php-snmp.i386 0:5.2.6-5 set to be updated
--> Running transaction check
---> Package perl-DBI.i386 0:1.607-1.fc10 set to be updated
---> Package dejavu-lgc-fonts.noarch 0:2.26-2.fc10 set to be updated
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
Package                 Arch          Version              Repository     Size
================================================================================
Installing:
cacti                   noarch        0.8.7b-4.fc10        fedora        1.9 M
Installing for dependencies:
dejavu-lgc-fonts        noarch        2.26-2.fc10          fedora        3.5 M
mysql                   i386          5.0.67-2.fc10        fedora        3.1 M
perl-DBI                i386          1.607-1.fc10         fedora        776 k
php-snmp                i386          5.2.6-5              fedora         24 k
rrdtool                 i386          1.3.4-2.fc10         fedora        391 k

Transaction Summary
================================================================================
Install      6 Package(s)
Update       0 Package(s)
Remove       0 Package(s)

Total download size: 9.7 M
Is this ok [y/N]:




 

From here, just a simple answer of "Y" will begin downloading these six packages then install them automatically.

 

Tip: use the "-y" option on yum to answer "yes" to everything.

 

2. Using yum to install a locally-stored RPM file: yum localinstall rpm-package-file, for instance:



Code:
# yum localinstall wine-2.3.4.5




 

3. Updating a package: yum update packagename, eg:



Code:
# yum update sudo
Loaded plugins: refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package sudo.i386 0:1.6.9p17-4.fc10 set to be updated
--> Finished Dependency Resolution

Dependencies Resolved

=============================================================================
Package       Arch          Version                  Repository        Size
=============================================================================
Updating:
sudo          i386          1.6.9p17-4.fc10          updates          225 k

Transaction Summary
=============================================================================
Install      0 Package(s)
Update       1 Package(s)
Remove       0 Package(s)
Total download size: 225 k
Is this ok [y/N]:




 

Tip: unlike the -U option to RPM, yum update will not update uninstalled packages. However, yum install will attempt to install a new package, or upgrade an already-installed one - use that option first!

 

4. Listing packages held on a repo: yum list searchterm will use that term as a filter, for example:



Code:
$ yum list yum
Loaded plugins: priorities
Excluding Packages in global exclude list
Finished
Installed Packages
yum.noarch                     3.2.19-3.fc8     installed
Available Packages
yum.noarch                     3.2.20-5.fc8      updates-newkey




Although yum version 3.2.19-3 is currently installed, a newer version (3.2.20-5) is available for updating.

 

5. Searching repos for packages: yum search package-to-search will look for packages matching that search term, eg:



Code:
# yum search sql
Loaded plugins: priorities
Excluding Packages in global exclude list
Finished
=================== Matched: sql ===========================
dovecot.i386 : Dovecot Secure imap server
dovecot-mysql.i386 : MySQL backend for dovecot
dovecot-pgsql.i386 : Postgres SQL backend for dovecot
dovecot-sqlite.i386 : SQLite backend for dovecot
hsqldb.i386 : Hsqldb Database Engine
hsqldb-demo.i386 : Demo for hsqldb
hsqldb-javadoc.i386 : Javadoc for hsqldb
hsqldb-manual.i386 : Manual for hsqldb
koffice-kexi-driver-mysql.i386 : Mysql-driver for kexi
koffice-kexi-driver-pgsql.i386 : Postresql driver for kexi
libgda-mysql.i386 : MySQL provider for libgda
libgda-postgres.i386 : PostgreSQL provider for libgda
libgda-sqlite.i386 : SQLite provider for libgda




 

6. Showing a package's dependencies: yum deplist packagename will determine what pre-requisites are required to install that package, i.e. if I want to yum-install a package, what others will yum download and install first?



Code:
# yum deplist cacti
Loaded plugins: refresh-packagekit
Finding dependencies:
package: cacti.noarch 0.8.7b-4.fc10
dependency: net-snmp
  provider: net-snmp.i386 1:5.4.2-3.fc10
  provider: net-snmp.i386 1:5.4.2.1-2.fc10
dependency: php-snmp
  provider: php-snmp.i386 5.2.6-5
dependency: /sbin/service
  provider: initscripts.i386 8.86-1
dependency: mysql
  provider: mysql.i386 5.0.67-2.fc10




In this case, installing cacti requires net-snmp, php-snmp and mysql (amongst other packages), as well as the "service" executable, which is provided by installing the initscripts package.

 

7. Finding which package provides a particular command or file: yum provides filename - this is similar to the "search" option mentioned earlier, except it looks for the actual files within the package rather than search against package names themselves, for instance:



Code:
# yum provides "*lokkit"
Loaded plugins: refresh-packagekit
setuptool-1.19.4-2.fc9.i386 : A text mode system configuration tool
Repo        : fedora
Matched from:
Filename    : /etc/setuptool.d/99lokkit

system-config-firewall-tui-1.2.13-2.fc10.noarch : A text interface for basic
                                               : firewall setup
Repo        : fedora
Matched from:
Filename    : /usr/sbin/lokkit
Other       : lokkit = 1.7.0




In this case, two packages contain files matching the "lokkit" name - I can pick which package I require, depending upon which file/command I need.

 

8. Uninstalling package: yum erase packagename will attempt to erase a package, showing which other files (dependencies on this package) need to also be removed to prevent orphaned packages.



Code:
# yum erase httpd
Loaded plugins: fastestmirror, priorities
Setting up Remove Process
Resolving Dependencies
--> Running transaction check
---> Package httpd.i386 0:2.2.3-31.el5.centos set to be erased
--> Processing Dependency: httpd-mmn = 20051115 for package: mod_ssl
--> Processing Dependency: httpd-mmn = 20051115 for package: mod_perl
--> Processing Dependency: httpd-mmn = 20051115 for package: mod_python
--> Processing Dependency: httpd-mmn = 20051115 for package: php
--> Processing Dependency: webserver for package: webalizer
--> Processing Dependency: httpd = 2.2.3-31.el5.centos for package: mod_ssl
--> Processing Dependency: httpd for package: system-config-httpd
--> Processing Dependency: httpd = 2.2.3-31.el5.centos for package: httpd-manual
--> Processing Dependency: httpd >= 2.0.40 for package: mod_python
--> Processing Dependency: httpd for package: squirrelmail
--> Processing Dependency: httpd for package: squirrelmail
--> Running transaction check
---> Package httpd-manual.i386 0:2.2.3-31.el5.centos set to be erased
---> Package mod_perl.i386 0:2.0.4-6.el5 set to be erased
---> Package mod_python.i386 0:3.2.8-3.1 set to be erased
...




In this case, Apache modules that depend on HTTPD installed will also be removed when attempting to remove Apache web server.

 

For more information, use man yum.

 

3. YUM File Locations

1. Config Files:

 

There are several config files for YUM, the main one being /etc/yum.conf which used to contain not only directives affecting YUM's behaviour, but addresses directing YUM to FTP servers.

 

The latter are now located in a /etc/yum/repos.d/ directory, one .repo file per FTP site. On a default install there will probably be the official RedHat repos provided - you may need to manually add additional repos in order to access a wider range of software.

 

To get a quick report on what repos are configured, use yum repolist all:

 



Code:
# yum repolist all
Loaded plugins: refresh-packagekit
repo id              repo name                              status
adobe-linux-i386     Adobe Systems Incorporated             enabled:     17
fedora               Fedora 10 - i386                       enabled: 11,416
fedora-debuginfo     Fedora 10 - i386 - Debug               disabled
fedora-source        Fedora 10 - Source                     disabled
fusion               Compiz Fusion repository               enabled:     48
fusion-source        Compiz Fusion repository - source      disabled
fusion-testing       Compiz Fusion repository -testing      disabled
rawhide              Fedora - Rawhide - Developmental packa disabled
rawhide-debuginfo    Fedora - Rawhide - Debug               disabled
rawhide-source       Fedora - Rawhide - Source              disabled
updates              Fedora 10 - i386 - Updates             enabled:  3,104
updates-debuginfo    Fedora 10 - i386 - Updates - Debug     disabled
updates-source       Fedora 10 - Updates Source             disabled
updates-testing      Fedora 10 - i386 - Test Updates        disabled
repolist: 14,585




 

Use yum repolist enabled (or just yum repolist) to show only those in effect (enabled).

 

2. Cache Directories:

 

YUM usually downloads RPM files somewhere under the /var/cache/yum/ directory containing cache subdirectories per repo, holding RPM files and repo metadata. Usually you won't need to worry about this area - but if something goes wrong mid-yum it can be worthwhile dropping into those directories and manually (using rpm) installing some of the packages that have been downloaded, rather than re-download the entire lot again.

 

To clean out any cached files, use yum clean packages

 

3. Other Considerations


  • outdated header files: since YUM caches repo headers locally, these files could contain incorrect information. Use yum clean headers to flush this information out first.


  • flushing caches: if yum STILL seems to be ignoring config files and insists on using older information, use yum clean all to purge yum of cached packages, headers etc - then try again.


  • automatic package updates: the yum-updatesd service (yum-updates-daemon) can keep packages automatically updated - checking, downloading and installing without any manual intervention, rather like Windows Updates. However, some problems may be encountered on production servers with unchecked newer software being upgraded without any testing or evaluation, breaking an already-running system (dovecot - I'm looking at YOU!). For that reason, many admins prefer to set their updates to "notify" rather than automatically upgrade: check the /etc/yum/yum-updatesd.conf file for details on modifying yum-updatesd behaviour




Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)