Jump to content

Help with an error message CPU.....


Recommended Posts

I have this error message come up on 3 servers...

 

Message from syslogd@machine3 at Sun Feb 27 17:15:46 2005 ...

machine3 kernel: CPU1: Temperature above threshold

 

Message from syslogd@machine3 at Sun Feb 27 17:15:46 2005 ...

machine3 kernel: CPU0: Temperature above threshold

 

Message from syslogd@machine3 at Sun Feb 27 17:15:46 2005 ...

machine3 kernel: CPU0: Running in modulated clock mode

 

Message from syslogd@machine3 at Sun Feb 27 17:15:46 2005 ...

machine3 kernel: CPU1: Running in modulated clock mode

 

 

I thought it was due to it getting hot, so i purchase a 1U Heatsink with fan, so its getting cool air to it.

 

Can anyone suggest anything for me.

 

It's 775 modo with a Intel P4 3 Ghz and 1 gig DDR ram. it has 5 blow fans, 2 suck fans, and a CPU fan.

 

 

Thanks

Link to post
Share on other sites

Did you check your CPU temperature when you got those messages? If you don't know how to do that check "lm_sensors" (or enter the BIOS very fast after rebooting :unsure:). The first message should be self explanationary, second one means that the CPU is not running at full speed.

Link to post
Share on other sites

i have tried to install LM_senosrs.. and i cannot seem to make it work.. its all install.. that i can see.. but no joy.

 

the servers are not held near me... so.. its abit of a trip to do it that way...

 

also.. its not even a duel macheine....

 

are there any really good guilds how to install LM_SENSORS, i have seached the net.. but they all seem out of date.. and thou the newest helps with with the questions.. i do as it says.. it still dont work... ?

Link to post
Share on other sites

yes, and i run through the list, paste the info needed into the right file, and copy as it requests at the end.

 

but... still no joy.

 

when i put Sensors in the cmd line, i get this error:

 

[root@machine1 ~]# sensors

Error: Line 2382: Invalid keyword

General parse error

 

?

Link to post
Share on other sites
[root@machine1 ~]# sensors

Error: Line 2382: Invalid keyword

General parse error

Ehm? :blink: This file is a binary on my FC4 release and not a script. What do you get upon "head -n2382 `which sensors`|tail -n1" (with backticks ``, but without quotes "")? How did you install lm_sensors?

Link to post
Share on other sites

i am not sure what the command dose, but, I dont really understand it.. and when i put it on, it just hangs there...

 

I installed it.. by i think... putting in sensors-detect, I did not install it myself, it was already there.

Link to post
Share on other sites

ok.. got it to work... this is the output:

 

Adapter: ISA adapter

VCore 1: +1.36 V (min = +1.42 V, max = +1.57 V) ALARM

VCore 2: +1.58 V (min = +2.40 V, max = +2.61 V) ALARM

+3.3V: +6.75 V (min = +3.14 V, max = +3.46 V) ALARM

+5V: +5.00 V (min = +4.76 V, max = +5.24 V)

+12V: +10.37 V (min = +11.39 V, max = +12.61 V) ALARM

-12V: -14.97 V (min = -12.63 V, max = -11.41 V) ALARM

-5V: -6.64 V (min = -5.26 V, max = -4.77 V) ALARM

Stdby: +4.87 V (min = +4.76 V, max = +5.24 V)

VBat: +3.18 V

fan1: 7670 RPM (min = 0 RPM, div = 8)

fan2: 10546 RPM (min = 664 RPM, div = 8)

fan3: 0 RPM (min = 664 RPM, div = 8)

M/B Temp: +62°C (low = +15°C, high = +40°C) sensor = diode

CPU Temp: +27°C (low = +15°C, high = +45°C) sensor = thermistor ALARM

Temp3: +37°C (low = +15°C, high = +45°C) sensor = thermistor ALARM

 

eeprom-i2c-0-51

Adapter: SMBus Via Pro adapter at 0500

Memory type: DDR SDRAM DIMM

Memory size (MB): 512

 

eeprom-i2c-0-50

Adapter: SMBus Via Pro adapter at 0500

Memory type: DDR SDRAM DIMM

Memory size (MB): 512

 

 

i do not know what Temp3 is... nor do i understand why i get the above messages...

 

anyone ?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...