Jump to content

problem compilation linux kernel 2.6.26 with debian etch r0


Recommended Posts

Hi, I have a problem after one compilation. My computer is a DELL Vostro 200, Intel Core2 Duo CPU E4500 (2.20GHz, 800FSB 2MB L2) with a hard drive: 250GB Serial ATA Hard Drive 7200RPM, 8MB Cache.

I've installed debian etch r0 which had a kernel 2.6.18 and I decided to install a 2.6.26 kernel.

I've done anything right like this tutorial says (http://wiki.loli-grub.be/index.php/Compilation_et_installation_du_noyau_sur_debian_Etch, sorry it's in french).

Everething was ok, after compilation, I reboot my computer, and try to go in the new installed kernel. But I get this :

usbhid: v2.6:USB HID core driver (hangs up for a long time here - few minutes)

 

Done.

 

Check root=bootarg cat /proc/cmdline

or missing modules, devies: cat /proc/modules ls /dev

ALERT! /dev/sdb1 does not exist. Dropping to a shell!

 

BusyBox v1.1.3 (Debian 1:1.1.3-4) Built-in shell (ash)

Enter 'help' for a list of built-in commands.

 

/bin/sh: can't access tty; job control turned off

(initramfs)

 

Then I'm in the shel model.

I have to sayy that for the installation of the first system debian etch r0, I've disabled the SATA mode in the bios, I put it to RAID, instead of IDE...beacause in IDE mode, at the begining of the installation he don't recognise the dvd.

Can somebody help me pleeeeeease!!!!!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...